Today, television technology has become more sophisticated, smart TV unknowingly already become an indispensable part of people's lives. Smart TV itself has a very flexible mode of operation, including the traditional remote control remote control, remote intelligent devices and so on.
However, for the elderly, intelligent remote control device becomes cumbersome way a lot, so that more older people will still use the traditional remote control to operate.
But in everyday life, a little used improperly, can cause failure of the traditional remote control. So in that case, we should do it?
Remote control does not check and resolve
1, remote control distance is correct: within 5 meters in front of the remote control within the effective and no obstructions in front of the TV.
2, the angle of the remote control: the TV remote control window to the apex, which controlled the angle of the left and right direction of not less than plus or minus 30 degrees in the vertical direction of not less than plus or minus 15 degrees.
3, such as remote control operation is not normal, unstable or not the TV remote control, replace the battery.
4. is not resolved, you can consider replacing the remote control.
Remote control daily care and maintenance
1, the battery should always be replaced in pairs, you must replace the battery with a new pair of a pair of old batteries.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries, such as: the "zinc carbonate" battery and "alkaline" batteries.
4. Never used to charge the battery, short circuit, disassembly, heating or burning.
5, only in bad or good times can not control the TV remote control operation, the only necessary to replace the battery.
6, such as not using the remote control or the batteries are exhausted, remove the batteries to prevent battery leakage and corrosion of the remote control.
Remote control battery correct installation
1, the remote control uses two AAA batteries.
2, in the manner shown in FIG instructions to install the battery and make sure battery terminals are installed correctly.
3. Do not mix old and new batteries. Not using the remote control, remove the batteries.
4, and properly dispose of used batteries, to avoid the reach of children.